Product ID:EPOXY RESIN, FE-0632-A
MSDS Date:12/11/1988
FSC:8040
NIIN:00N020832
MSDS Number: BLKNW

Emergency Phone: 612-481-3300

Info Phone: 612-481-3300

Preparer: INDUSTRIAL HYGIENE

Cage: 0HD19

Telephone: 612-481-3300

Cage: 0HD19

EPOXY RESIN

Fraction By Weight: >10%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: DIRECT EYE CONTACT WITH PRODUCT
MAY CAUSE IRRITATION. SKIN: EPOXY RESINS ARE POTENTIAL DERMAL
SENSITIZERS. INHAL: INHALATION IS NOT A ROUTE OF EXPOSURE.
(CHRONIC) NO ANTICIPATED CHRONIC EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: FLUSH IMMEDIATELY W/WATER FOR AT LEAST 15 MINUTES. CALL
MD IF IRRITATION PERSISTS. SKIN: WASH AFFECTED AREA W/SOAP & WATER.
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. INGEST: CALL MD
IMMEDIATELY . INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O2/ARTIFICIAL RESPIRATION) .

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
MATERIAL. RESIDUE MAY BE REMOVED WITH A CHLORINATED SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:S/O G I A COO H DRQ HO ATION.
Other Precautions:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.

Respiratory Protection:NOT NORMALLY REQUIRED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WASTE DISP METH: APPLY. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE
AND LOCAL REGULATIONS . FOR ADDITIONAL WASTE DISPOSAL ASSISTANCE
CONSULT H B FULLER ENVIRONMENTAL SERVICES 612/ 481-1588.

HCC:N1
Appearance and Odor:LIQUID.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS, CO.

Waste Disposal Methods:THIS PROD DOES NOT MEET THE DEFINITION OF HAZ
WASTE UNDER U.S. EPA HAZ WASTE REGS 40 CFR 261. INCINERATE OR
DISPOSE OF IN AN APPROVED INDUSTRIAL LANDFILL; CONSULT YOUR LOCAL
OR STATE AUTHORITIES IN EV ENT MORE RESTRICTIVE REQ (SUPP DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.